Mongoose Aim Settings

[Krispee]

So im thinking maybe its these 3 settings..

A. is this the aiming circle? 0 being fully aimed?

B. This point it considers for shot if C is met?

C. This is the final check if it hits this % it stays at this point?

 

I rarely use the aim up close..it’s faster to shoot know weak points close when playing peak a boo lol

I just lowered A and going to test from the default setting…

My ping is always 35ms or less

playing on a high end pc I9-9900 with ssd n all the stuffs

Just trying to solve the issue of misses on my tanks that usually dont miss…I can understand a non penetration but to totally miss multiple times just hit me as strange last night when playing..Thought if I could understand some of the settings better I could adjust.  I did notice it didnt suffer from the bad first shot that ewa2 had..that’s a huge plus

 

Didnt want to mess with the preemption setting cause of the warning it gives lol 

[WHYPHY]

I feel a A_Troll response coming…

but i’ll beat him  

A) Yes it is, 0 would be fully aimed in on target. Keep in mind that only affects autoshooting and not manual firing.

B and C) Whatever value is in min % chance is set to, the aimbot will only look for shots at or above that chance to pen. Shots that have a % chance to pen at or higher to desired % chance value take priority. 

[Krispee]

its no troll question? 5 skill crew in lep 1 usually never misses. so its a valid question imo

 

So everything in A section is only on autoshot?

Noticed last night better results on autoshot with changing A

 

Im not yelling saying its crap or anything…cause it doesnt do the bad first shot thing anymore.

and if I dont know the setting usage then how can ya adjust.

 

[A_Troll]

I’m busy working on an explanation of the settings but work and testing is getting in the way so it’s not really ready yet. I will answer your questions but I need to explain some stuff in the beginning first.

RNG and crew skills are factors that will make the best aimed shot miss. It does not matter how good an aimbot is. An aimbot will IMPROVE your chance to hit…. it is still not a 100% ticket.

Now we have to think about the “hidden” stats in WoT. One is “individual RNG”. Another one is “individual MM”. The most important one is “parameter adjustment”. Have you noticed that some days you will get god-like games some days wins but no damage and some days damage but no wins? Some days you will ALWAYS be bottom tier and some days you will get spotted every shot even though you are double bushed behind a house? Does it seem random? It’s not ! The game will tweak your performance so the really good players have to work harder and the bad ones at least have a chance. It’s the way the game works.

Now…. to your questions.

A. Think like this…… Full reticle bloom is 100% and fully aimed is 0%- So setting 57% will wait until the reticle has shrunk 57% and this will allow this setting to be met. 100% aim is STILL affected by your dispersion value for that tank.

B. If you can pen 100mm and the amour is 100mm thick (don’t forget to include angling thickness) you have 100% chance to pen. If you can pen 80mm and the armour is 100mm then your chance is 80%. If you pen or not is still defined by RNG because it factors in the hit calculation by WoT. (Stop blaming the aimbot lol). This setting will give you a green marker at 80% (if you set that)  and count as a “possible”. If it is not green the aimbot will search for another point. Setting this value too low will cause the aimpoint to twitch and make it obvious to anyone in your tank that you are using an aimbot. If nothing is found above this value it will lock center tank (or turret or tracks if you set that).

C. This value is a tweak to “B” above. If you set this to 75% like you did then it will consider all all points set by B but if it finds a point above what set here it will lock there and stay there. Otherwise it will lock on the highest value found in B…… or lock center if everything is below B.

I don’t understand when you said “usually hit” because nothing “usually hits” for me lol.

Your PC setup is golden. BUT……..  A high end PC will improve you graphics but does nothing for RNG. It can improve how fast the aimbot calculates parameters and tweaking the settings makes a difference to the response time of the calculations in real time but still does nothing to RNG.

Hope this helps.

 

[A_Troll]

7 minutes ago, Krispee said:

its no troll question? 5 skill crew in lep 1 usually never misses. so its a valid question imo

 

So everything in A section is only on autoshot?

Noticed last night better results on autoshot with changing A

 

lol. I’m A_Troll.

Yes. A is autoshoot only. Reticle reduced to that value = shoot.

[WHYPHY]

1 minute ago, Krispee said:

its no troll question? 5 skill crew in lep 1 usually never misses. so its a valid question imo

No lol sorry the user A_Troll (another moderator here on BW) he tends to answer these questions. Your question is far from a troll question.

[Krispee]

7 minutes ago, A_Troll said:

 

A. Think like this…… Full reticle bloom is 0% and fully aimed is 100%- So setting 57% will wait until the reticle has shrunk 43% and this will allow this setting to be met. 100% aim is STILL affected by your dispersion value for that tank.

 

Ahhh, well when you hover in game it says “where 0 – full aiming” so thats a range? not actually saying 0 is fully aimed setting?

[A_Troll]

4 minutes ago, Krispee said:

Ahhh, well when you hover in game it says “where 0 – full aiming” so thats a range? not actually saying 0 is fully aimed setting?

Oooops my bad. Sorry I will edit the post.

Sorry…. I was typing this from memory and didn’t look at my notes…. yeah they are 6 pages long so far and I’m trying to make them readable before I post a wiki.

No. It’s not range it is reticle size.

[A_Troll]

One of the things I didn’t mention is “tick times”. The speed for point searches.

If you have a tank with poor dispersion on turret rotation for that tank, setting fast search times will cause the reticle to micro-bloom while searching this can be affected by the performance of your PC, ping time etc. This is why best performance is individual and sharing settings does not really work.

Initial capture will give you a generic capture point… then the bot looks for weak spots. So generally a good capture = snap + weak point search.

[Iamonbenzedrine]

Thank you  <a contenteditable="false" data-ipshover="" data-ipshover-target="/profile/16503-a_troll/?do=hovercard” data-mentionid=”16503″ href=”/profile/16503-a_troll/” rel=””>@A_Troll for the explanation,

Am waiting for your wiki regarding the aimbot (and hopefully explaining all the other mods included). I also wish that you make it as a guide on how we can adjust our own settings. For example, I play mostly on light tanks and my ping is around 100 ms. wish there are preset settings to choose the ping we play on.

[A_Troll]

I’m working on it. Sadly a universal settings guide will not be done because your PC specs make a difference.

[Krispee]

So the “number of points processed per frame” is what you’re talking about? Higher number being faster search? has the comment about higher cpu usage with the higher number.

[A_Troll]

No. ALL the settings depend on PC/ping etc. There is no easy way to get good settings apart from doing them yourself. Jeez you guys are so lazy lol.

[Krispee]

im not looking for easy or I would not of posted asking each setting. Above you mentioned “Tick Times” I dont see that setting in there but what I posted above “number of points processed per frame”

 

What works for me and my very low ping and i9 pc will not work for someone with 100ping and a 10year old cpu. this you made clear…I just didnt want to blindly change a setting without knowing what it did.

[A_Troll]

I was being funny. 😉

OK. Tick time is your “weak-point” search interval.

Think of it like this…..

RMB causes initial lock and the bot snaps the target.

The target is put in a virtual frame and points are scanned (does “number of points processed per frame” sound familiar?). The bot will choose the highest pen chance as long as it meets B and C in your OP.

One tick = initial lock

one tick = weakpoint capture.

So…. a weak-point capture is not immediate but mostly it is faster than your aim-time so most missed shots is because of reticle bloom.

Turret rotation will mess with the bloom so if you set A wrong you will never capture a weak-spot and the bot will default on center mass.

[Author]

Posts