EWAv2 Not changing aim point.
- This topic has 7 replies, 2 voices, and was last updated 7 years, 6 months ago by .
-
Posts
-
When I try to change the aim point to the hull or anything else, it doesn’t work. It overlaps the two words when i try to change aiming location, and it doesn’t aim at the new spot. I have included a screenshot.
Check the settings so you have not set the same key on both positions.
27 minutes ago, lopso111 said:It does that with the default setting. Holding down Alt and scrolling the mouse wheel.
OK. This is sticky. Unfortunately the site does not support SAE any more and the SAE version released was a courtesy to the SAE users.
Unless one of the admins have a possibility to contact SAE and fix this, it will not be fixed.
I would advise you to try EWA2. It is a good aimbot and I stopped using SAE a while ago because I felt EWA2 is as good if not better than SAE. That’s my opinion.
I understand that you like SAE but times change and things move in a different direction.
To be honest changing to EWA2 would be a good choice because you can get direct support here 24/7 instead of waiting that an update MIGHT happen. EWA2 and BW mods are always updated for every patch. The staff are here to help and there are many staff and users here that have been using the mods for years and can help with most problems.
SAE WAS the best aimbot. Now it is old. Things change.
Hahahaha OK np bro.
Right. Go into the settings (ESC then choose the settings).
Check the section for EWA2 and make sure you have individual keys for each point. I changed them to numberpad1, numberpad2 and numberpad3 to avoid conflicts with other mods and choosing ammotype in game.
This should stop any conflicts. To be honest I have never tried Alt+scroll. I just press Alt+Num1 (or 2 and 3). I do know that if you select “Hull” and it is already selected, nothing will happen in the GUI. Please check the settings then try Alt+whatever and see if it works correctly.
I will try Alt+scroll later and see if it works as it should. This might take a while because I am not playing at the moment.
If numberpad 3 brings up the menu you have messed the keys up. You need to press alt+numberpad (1 2 3) in the settings and in game.
One thing to be carefull of (I have done it)
When you are scrolling in the settings menu, if you happen to hover over a setting while scrolling with the mouse, it will change that setting.
Now….. on the first page of the settings look at “Hotkey to open settings window in batttle/hanger” That should be Alt+P
The rest should look like………..
- You must be logged in to reply to this topic.