Re: BW AutoAim CONFIG

Here’s a how-to because this came up in a PM.

If you want to adjust the configs yourself…. try this.

First save your config file so you can start again if something doesn’t work.

1. Get your favorite tank.

2. Get a friend to help you in a training room,  he needs a fast medium and a fast light.

3. Get him to run at full speed 90 degrees to you @ 100 meters, then 300 meters on even ground.

4. Adjust the lead in the aimbot so you hit center tank @ 100M then the same for 300M. Do the same for the light and the (slower) med. You might have to do it a few times because of RNG. You should now have 4 values. (Remember that shells fly at different speeds too).

5. Add the values together and divide by 4. This is what you set on the “lead” value in the configs.

6. Adjust the height offset by looking at stationary target with “weak spot search” turned off.  This is important because of the height difference between an even 90 and an OI. (You need to do this 3 times for turret, body and track).

You should be good to go. I do this for each of my main tanks and I use the standard config for tanks I don’t play so much. Remember RNG, will mess with you, so be patient.